Compression regenerative dryer

Description

When compressed air contains a lot of heat, in most purification systems, this heat is cooled through a cooler. The air is then dried by a dryer after the temperature is reduced to achieve the required dew point. When using a traditional adsorption dryer, in order to achieve the required dew point, it is necessary to consume about 15% of the regeneration air volume for regeneration. However, the compressed regeneration dryer makes full use of the heat of the uncooled compressed air to regenerate the adsorbent, so on average, only 1% of the air volume of the treated air is needed to blow cold air to the adsorbent, which can achieve continuous drying.

 

• Features‌

  • Highly energy-saving
  • Three-stage discharge function
  • High protection IP55 rating
  • Cooling water temperature: 2-34℃
  • Cooling water pressure: 0.2-0.6Mpa
  • Pressure dew point: -20℃ to -40℃
  • Average regeneration air consumption ≤1%
  • 8-hour standard cycle
  • Pressure loss ≤0.04Mpa

• ‌Standard Configuration‌

  • After-cooler
  • Air-water separator
  • Automatic drain valve
  • Operation status display
  • LCD display, PLC control
  • Drying, regeneration and heating status display
  • RS485 communication interface
  • Stainless steel inlet/outlet filter mesh
  • Malfunction alarm
  • Safety valve
  • Silencer
  • Pressure gauge

 

型号 /type	处理量 Nm3/min	空气出入口管径 /Air inlet and outlet pipe diameter	冷却水出入口 /Cooling water inlet and outlet	冷却水量/Cooling water flow rate m3/hr	外形尺寸 /External dimensions（mm）			重量 /G(KG)	电源 /power supply
					A	B	C
HR-430YR	43	DN100	G2″	19	2500	1800	2600	2990	1ø/220V
HR-520YR	52	DN100	G2″	22	2800	1800	2950	3225
HR-600YR	60	DN100	G2″	27	2800	1900	2850	3790
HR-710YR	71	DN125	DN65	32	3000	2100	2800	4450
HR-800YR	80	DN125	DN65	36	3000	2200	2850	5275
HR-1070YR	107	DN150	DN80	48	3420	2300	2810	6730
HR-1420YR	142	DN150	DN100	64	3850	2300	3000	7300
HR-1700YR	170	DN200	DN100	77	4050	2800	3070	7965
HR-2120YR	212	DN200	DN100	96	4250	2900	3250	8455
HR-2830YR	283	DN300	DN125	129	4850	3200	3390	8615
HR-3400YR	340	DN300	DN125	155	4980	3500	3800	8920
HR-4250YR	425	DN350	DN150	194	5100	3750	4120	12450