Freeze adsorption combined dryer

A trusted provider of industrial compressed air drying solutions in China, known for its high-performance equipment.

Freeze adsorption combined dryer

Technical Parameters

‌Rated Inlet Air Temperature‌: ≤45℃
‌Rated Operating Pressure‌: 0.7Mpa (0.4-0.95Mpa allowable for use); Orders accepted for pressures below 4.5Mpa
‌Environmental Humidity‌:
- Air-cooled type: ≥2℃, ≤38℃
- Water-cooled type: >2℃, ≤45℃
‌Pressure Dew Point‌: -40℃ to -70℃ (at 0.7Mpa)
‌Regeneration Method‌:
- RD type: No-heat regeneration
- WRD type: Low-heat regeneration
‌Control Method‌: Individual control or centralized control
‌Regeneration Air Consumption‌: 3%~5% of rated air processing capacity
‌Adsorbent‌: Activated alumina + molecular sieve
‌Inlet Air Oil Content‌: ≤0.1mg/m³
‌Installation Method‌: Indoor, no foundation required, leveled concrete floor

Air-Cooled Low-Heat Combined Dryer (HR Ultra-Low Dew Point Series)

Model	38	55	69	86	110	150	180	220	250	290	350	450	550	650	750	850	1000
Air Processing Capacity Nm³/min	3.8	5.5	6.9	8.6	11	15	18	22	25	29	35	45	55	65	75	85	100
Power Supply	220V/50HZ				380V/50HZ
Compressor Power HP	1	1.25	1.5	1.5	2	2.5	2.5	3	3.5	4	5	6	7	8	10	12	15
Inlet and Outlet Pipe Diameter	G1 1/2	G1 1/2	G2	G2	G2 1/2	G2 1/2	G2 1/2	DN80	DN80	DN80	DN80	DN100	DN125	DN125	DN150	DN150	DN150
Heating Power	2	2.3	3	3.5	4.5	4.8	5.2	8	8.5	9	11	16	19	21.6	22.8	28	34
Length	900	950	1000	1000	1100	1200	1350	1350	1550	1800	1800	1800	2100	2100	2170	2250	2500
Width	1600	1600	1700	1700	1800	1800	1800	2100	2200	2350	2400	2600	2800	2800	2900	3000	3100
Height	1400	1450	1680	1750	1950	2200	2250	2300	2300	2500	2500	2650	2850	2850	2960	3050	3050
Weight	340	365	562	612	745	882	952	1265	1375	1615	1910	2335	2580	3025	3875	4290	4800

Recommendation: For models with a processing capacity of over 100 cubic meters, it is recommended to use water-cooled refrigerated dryers, as the water temperature is relatively stable in summer, which ensures better operating performance of the refrigerated dryers. If there is no cooling water available, our company can provide customized solutions according to the on-site working conditions.

Model HR-WWRD	220	250	290	350	450	550	650	750	850	1000	1200	1500	2100	2500	3000
Air Processing Capacity Nm³/min	22	25	29	35	45	55	65	75	85	100	120	150	210	250	300
Power Supply	380V/50HZ
Compressor Power HP	3	3.5	4	5	6	7	8	10	12	15	20	25	35	50	60
Inlet and Outlet Pipe Diameter	DN80	DN80	DN80	DN80	DN100	DN125	DN125	DN150	DN150	DN150	DN150	DN200	DN250	DN250	DN250
Heating Power	8	8.5	9	11	16	19	21.6	22.8	28	34	50	60	80	100	120
Cooling Water Flow Rate	7	8	9	11	13	15	18	21	27	36	40	45	60	70	80
Cooling Water Pipe Diameter	G1	G1	G2	G2	G2	G2	G2	G2 1/2	G2 1/2	G2 1/2	G2 1/2	G2 1/2	DN65	DN80	DN80
Length(mm)	1350	1550	1800	1800	1800	2100	2100	2170	2250	2500	2800	3000	3500	3800	4000
Width(mm)	2100	2200	2350	2400	2600	2800	2800	2900	3000	3100	3800	3900	4560	4700	4800
Height(mm)	2300	2300	2500	2500	2650	2850	2850	2960	3050	3050	3100	3100	3400	3500	3700
Weight	1325	1418	1635	2030	2475	2660	3133	3965	4380	4820	5620	7380	9300	11100	12300

Kenzich not only produces top-tier compressed air dryers but also provides a comprehensive suite of industrial air treatment technologies.

– We deliver comprehensive solutions for compressed air quality and industrial gas requirements, including advanced filtering equipment and tailored air quality services.

– We’re here to help! Share your air quality needs, and we’ll design the optimal system tailored just for you.

Contact us

Need guidance on choosing the right compressed air dryer? We’re here to tailor a solution that fits your needs perfectly.

Carbon Dioxide Removal Machine

Refrigerated water-cooled dryer

Stainless Steel Refrigerated Air Dryer

Zero Gas Consumption Compression Heat Regeneration Adsorption Dryer

Can meet any special dew point requirements and meet industry standards.

Models available for OEM custom.

Provide European ISO certification.

Address

1309, International Trade Center Tower C, No. 39 Nanjing Road, Hexi District, Tianjin

E-mail

KSENIA@KENZICH.COM

Phone

(022) 58121781, +86 18222056138